TD330 Through Dovetail Jig MM01-18 Pitch (Teeth Per Inch): 14

Pitch (Teeth Per Inch): 14 tpi

Parts can now easily be removed and salvaged by selecting the proper diameter rod and carefully tapping it back out

5 individual tilt-out bins contained within a hard plastic frame

regardless of the cleaning surface

TD330 Through Dovetail Jig MM01-18 Pitch (Teeth Per Inch): 14The Leigh Model TD330 Through Dovetail Jig is easy to use and affordable. Two carbide tipped dovetail and straight router bits make joints in board widths up to 12 7 8" and board thicknesses up to 13 16" right out of the box. Following the included instructions, the woodworker will attach the jig to a sacrificial board. Then routing through dovetail joints on the TD330 is straight forward. Rout the tails, rout the pins, assemble the joint, and adjust